Concrete Resurfacing Gilbert AZ | Free Quote, 2-Yr Warranty Skip to main content
Stamped slate-pattern walkway under a covered patio, with a trench drain along the pool fence
Gilbert, Arizona

Concrete Resurfacing in Gilbert, AZ

5.0★ Google rating · Insured · 2-year warranty

Concrete resurfacing in Gilbert grinds and repairs a sound slab, then bonds a decorative overlay to it: a smooth or textured finish usually takes 1–2 days on site, a stamped pattern 2–4 work days.

Free Gilbert Quote

We'll call you back within 24 hours

Please enter your full name
Please enter a 10-digit phone number
Add email or details (optional)
For your written quote. Please check your email address, or leave it blank
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
  • Free Written Quotes
  • Locally Owned, Based in Avondale
Concrete Resurfacing · Gilbert

Concrete in Gilbert: What We Usually Find

Round tan flagstone-pattern pad at the end of a stepping-stone path
Round flagstone-pattern pad · stepping-stone path

Morrison Ranch and Agritopia lean on curb appeal, so walkways, entries, and courtyards matter as much as the backyard. A stamped or textured overlay gives that aging concrete a finished look that suits the neighborhood.

Concrete resurfacing covers structurally sound concrete with a bonded overlay (smooth, textured, or stamped to look like stone, tile, or brick) at a fraction of what tear-out and re-pour costs. Sun-baked Arizona slabs crack; the overlay system deals with that honestly: repairs first, then the finish. Free written estimates, quoted from the actual surface.

Related finishes: stamped overlays (flagstone look), stamped concrete patterns, and, inside the garage, epoxy floor coatings.

How We Work

Concrete Resurfacing in Gilbert, Step by Step

Evaluate the Slab

We look at crack patterns, edges, and drainage to separate surface wear from slab movement. Overlays are for the first kind.

Grind & Clean

Grinding opens up the surface so the overlay locks in. Skipping it is the most common reason overlays delaminate.

Repair & Overlay

Cracks are repaired, then the overlay goes on at the thickness the finish needs: thin for texture, thicker for stamped patterns.

Seal & Protect

A UV-stable sealer goes on last to lock in the color and shed water, dust, and stains.

Want the details before we come out? How a resurfacing job runs walks through the estimate, prep, coating, and cure, and our 2-year warranty lists coverage, exclusions, and how to make a claim.

Why Gilbert Homeowners Choose Us

Included on Every Gilbert Concrete Job

Stamped Patterns

Stone, slate, brick, and tile looks over plain gray concrete.

10–15 Year Overlay Life

Stamped overlays typically run 10–15 years in Arizona exposure, with a reseal every few years.

2-Year Warranty

Workmanship warranty in writing on every overlay.

How Long It Takes

Concrete Resurfacing Timeline by Job Size

Light foot traffic is fine in 24–48 hours, full cure takes 3–7 days, and a stamped overlay typically lasts 10–15 years with resealing.

How long jobs in Gilbert usually take, by size. Temperature changes cure time, and the written quote gives your dates.

JobDays on site
Walkway or entry landing1 day
Courtyard or patio-size slab, textured1–2 days
Large stamped area2–4 work days, or longer for a large area; your quote sets the dates
Connected areas, one finishOver 2 days, set in your written quote

The ranges come from manufacturers' data sheets: the Quikrete Re-Cap Concrete Resurfacer data sheet is one public example, with air and slab between 50°F and 90°F.

Our Work

Concrete Resurfacing Projects

Every photo is our own completed work.

Local Knowledge · Gilbert

Sun and Heat on Gilbert Walkways and Entries

Side-yard walkway freshly stamped and sealed in a dark slate pattern, landscaping wrapped for protection
Stamped slate overlay, freshly sealed · side-yard walk

Gilbert's newer subdivisions have young trees and little mature shade: most decks sit in full sun all day, which shortens coating life on decks that go unmaintained. Walkways and entries sit in the same sun, so lighter overlay colors are worth a look there too.

We work across Val Vista Lakes, Power Ranch and Higley, Seville (south Gilbert), and Morrison Ranch and Agritopia; the Gilbert ZIP codes are 85233, 85234, 85295, 85296, 85297, and 85298. We also cover the area around Riparian Preserve at Water Ranch and Gilbert Heritage District.

Gilbert is about 30 straight-line miles east of our Avondale base; the service-area map, ZIP codes and soil notes for Gilbert are on our Gilbert page. Directions from our Avondale base.

The driving route from our Avondale base to Gilbert, on Google Maps.
Free Written Quotes

What Drives the Cost of Concrete Resurfacing in Gilbert

Tan flagstone-look stamped overlay on a covered patio slab, crew finishing the edges
Stamped overlay (flagstone look) · covered slab, edges in progress

Price depends on the surface in front of us, not on a rate card, which is why we don't list prices. For concrete work in Gilbert, these are the biggest factors:

  • Color: one integral color, or stains and accents layered for a stone look.
  • Edges and transitions at doors, garage thresholds, and where new finish meets old concrete.
  • Slab condition. Surface wear is what an overlay fixes; settled or heaving sections need a different fix and are quoted separately.
  • Total area, with each walkway, landing, and step measured on site.
  • Surface prep. The more old sealer, paint, or stained top layer to grind away, the more prep time.

In Gilbert: Former farm soil that swells and shrinks shows up as control-joint and step cracks on younger slabs; each one is repaired, and listed on the quote, before any overlay.

You get the number in writing after we have seen the surface, at no charge. Comparing contractors? Our guide on how to compare written quotes has a line-item worksheet.

Google reviews

Reviews from Our Pool Deck Customers

In their own words, from reviews our customers left on Google.

Pool-deck reviews, not concrete ones: both are from backyard deck jobs done by the same crew that handles concrete work. Most jobs take 1–2 days of work plus a 3–7 day cure.

“They completely transformed our pool deck. The cool deck surface keeps it comfortable even in the Arizona summer heat. Great crew, very professional.”

Mike R.Google review

“Got a quote within a day and the work was done in 3 days. Pool deck looks brand new. Price was fair and the warranty gives us peace of mind.”

Sarah T.Google review
Common Questions

Concrete Resurfacing in Gilbert: Questions We Hear

How thick is a concrete overlay?

Thin: from a skim coat for texture finishes to a thicker layer for stamped patterns. It adds very little height, so doors, drains, and transitions usually stay as they are. We check edges and thresholds at the estimate.

How long does resurfaced concrete last?

Stamped concrete typically runs 12–15 years and stamped overlays 10–15 years in Arizona conditions, with a reseal every few years. Every job carries our 2-year workmanship warranty in writing.

What do monsoon storms do to walkways on graded Gilbert lots?

Monsoon storms leave dust on walkways and send water across them; a sealed overlay rinses clean, and we check that water runs away from the house. Monsoon storms bring dust and short, heavy rain to Gilbert, and lots in the newer communities are graded to drain toward the street or a retention area.

Can you do a patio in Seville, Gilbert too?

Yes, in Seville too. Newer Gilbert homes usually have a covered patio that runs straight into the pool deck, so we resurface both in one continuous finish. We can quote it with this job or on its own.

How soon can you look at a walkway in Agritopia or elsewhere in Gilbert?

Usually a few days out for the estimate in Agritopia; we set the visit when you call. How long the work itself takes depends on size, as the timeline shows; the written quote sets your dates.

Does a front walk color need approval in Val Vista Lakes, Power Ranch or Morrison Ranch?

Almost always: Val Vista Lakes, Power Ranch, Morrison Ranch, Agritopia, Seville and most other Gilbert neighborhoods run architectural review. A front walk or entry is visible from the street, which is what most reviews look at, so if one applies you get samples and a written scope to submit.

Why do walkways and entries crack on Gilbert's old farm soil?

Mostly ground movement and age, which is why we repair cracks before any overlay. We repair those cracks before any overlay goes on.

Can a resurfaced slab be pressure washed?

Yes. Use a moderate pressure and a wide fan tip; a narrow, high-pressure stream held close can etch the sealer.

Do you resurface garage floors as part of a concrete job?

Garages usually get epoxy instead of an overlay, which our garage epoxy page covers. If you want both done, we quote them together.

Can resurfacing fix a slab that has sunk or lifted?

Not on its own. An overlay takes the shape of the concrete beneath it, so a section that has settled or heaved has to be leveled or replaced first, or left alone. Movement is the first thing we check, and we only quote an overlay over a slab that has stopped moving.

Want new-looking concrete without the jackhammer?

Free written quote for your Gilbert project, with no pressure and no surprises.

Call (623) 521-1096 Text Free Quote