Cool Deck Resurfacing in Avondale, AZ
5.0★ Google rating · Insured · 2-year warranty
Cool deck resurfacing in Avondale removes whatever old coating has let go, repairs the slab, and sprays a new lace-texture cool deck system, usually in 1–2 days on site.
- Free Written Quotes
- Locally Owned, Based in Avondale
Cool Decks in Avondale: What We Usually Find
Garden Lakes decks built between 1987 and 1992 often still carry their original cool deck texture, worn through in the walking lanes. Where it's bonded, a new lace texture system goes over it after repair. Where it's hollow, it comes off first.
A cool deck for your pool is a coating with a textured finish, usually lace texture, that reflects heat instead of storing it. If your original cool deck is chipping, faded, or patched past its prime, we resurface right over it after proper repairs. Quoted per project from the actual surface; free written estimates.
For the system itself (colors, textures, and how it handles Arizona heat) see our cool deck coating page. If your deck only has a few chips, cracks, or hollow spots and the rest is sound, cool deck repair may be all it needs.
Cool Deck Resurfacing in Avondale, Step by Step
Surface Assessment
We tap the deck for hollow, delaminated spots and map where the old coating still holds. That decides what comes off and what can stay.
Strip & Repair
Loose and peeling material is scraped and ground off, cracks are opened and filled, and low spots are patched so the new texture lies flat.
Lace Texture Application
The lace texture is sprayed on and knocked down by hand: that pattern is what gives cool deck its grip and keeps the surface from soaking up heat.
Color Coat & Seal
Color and sealer finish the job. Light foot traffic in 24–48 hours; give it 3–7 days of cure before heavy furniture goes back.
Every job follows the same written steps: see our full resurfacing process, including how we protect the pool and the house. The work is backed by a 2-year workmanship warranty, and that page spells out what it covers and what it doesn't.
Included on Every Avondale Cool Deck Job
Slip Resistance
Textured surface grips wet feet where smooth concrete gets slick.
Light Colors Stay Coolest
Creams and sands reflect the most sun; you pick from real samples, not a screen.
Honest Strip-or-Coat Call
If the old surface has to come off, the quote says so, not halfway through the job.
Cool Deck Resurfacing Timeline by Job Size
It takes foot traffic in 24–48 hours, typically lasts 10–12 years (5–7 in harsh exposure), and in a light color can run up to 30°F cooler than a dark surface in the sun (source: Lawrence Berkeley National Laboratory Heat Island Group, light vs. dark pavement measurements).
How long jobs in Avondale usually take, by size. Temperature changes cure time, and the written quote gives your dates.
| Job | Days on site |
|---|---|
| Re-texture and color over a sound deck | 1 day |
| Typical deck with repairs and a full system | 1–2 days |
| Full strip of failed cool deck, then a new system | Over 2 days, set in your written quote |
| Spot repair only (see cool deck repair) | Often a few hours to a day |
Re-Texture or Full System? How We Decide
If the old cool deck still holds tight and lies flat, a re-texture is usually enough: repair the cracks, apply a bond coat, then new lace texture, color, and sealer. Faded, chalky decks and decks worn smooth where people walk are the typical candidates.
When big sections sound hollow, the coating peels in sheets, someone painted over it, or patch on patch has left the surface uneven, the deck needs a full system: base coat on bare or repaired concrete, then lace texture, two color coats, and sealer. Anything loose is removed first.
That call gets made at the estimate. We tap every section, scrape a test spot, and mark what stays and what gets stripped, and both appear in the written quote.
Cool Deck Resurfacing Projects
Every photo is our own completed work.
Cool Deck in Avondale's Housing Stock
Cool deck has been around since Mortex developed Keystone Kool Deck in 1962, which is why the original texture on an older pool is often the same age as the house. The original product bonds only to bare, sound concrete, while today's coating systems can go over old texture that still holds; our Kool Deck vs cool deck coating guide walks through both.
Garden Lakes was built between 1987 and 1992. Coldwater Springs homes are about two decades in, the age when coatings wear through at the steps and coping, while Alamar's newest decks are not due yet.
Avondale sits under 1,000 feet, where the Agua Fria meets the Gila: low, flat, and open to the afternoon sun, so an uncoated slab soaks up heat all day and gives it back well into the evening.
In Avondale, we work in Garden Lakes, Coldwater Springs, Rancho Santa Fe, Old Town Avondale, and Alamar (ZIP codes 85323 and 85392).
Where Avondale Sits on Our Service Map
Avondale is our home base and business address, so estimates are a short drive. Summer jobs here can start at first light, when coatings go down best.
Our business address is in Avondale, AZ 85323, so every Avondale job is close to home. Nearest to Avondale on the map: Goodyear, Litchfield Park and Glendale.
Avondale jobs run on the same written process as the other 17 cities we serve, and carry the same 2-year workmanship warranty.
What Drives the Cost of Cool Deck Resurfacing in Avondale
We don't publish prices, because two cool deck jobs the same size can need very different prep. These are the things that move the quote up or down in Avondale:
- Color plan. Blending into areas you keep takes more care than recoloring the whole deck.
- Paint and old patches that must be removed so the new texture bonds to sound material.
- How much of the old texture is still bonded. Sound areas stay; hollow and peeling areas are stripped, and stripping is the biggest swing in the price.
- Scope of the system. Re-texturing a sound deck needs fewer coats than building a full system on bare concrete.
- Measured square footage, including steps, coping edges, and walkways tied into the deck.
In Avondale: With decades of settling on Old Town and Western Avenue slabs and Garden Lakes concrete past thirty years, repair is quoted section by section, only where a slab needs it.
The estimate is free and the quote is written, with the scope spelled out so it can be compared item by item; our cost guide explains how.
Cool Deck Resurfacing Before & After
Same spot, before and after, from our projects page. No stock photos.
Google reviews
What Our Customers Say
Google reviews from our customers, quoted word for word.
“They completely transformed our pool deck. The cool deck surface keeps it comfortable even in the Arizona summer heat. Great crew, very professional.”
“Best decision we made for our backyard. The deck stays cool, looks amazing, and the kids can walk barefoot again. Highly recommend Master Pool Decks!”
Cool Deck Resurfacing in Avondale: Questions We Hear
Can you put new Kool Deck over my old cool deck?
Not directly. Genuine Keystone Kool Deck bonds only to bare, sound concrete, so every existing coating has to be stripped first. That's why most already-coated decks get a cool deck system instead: it can go over a sound, bonded old surface after repair. We explain both routes at the estimate; the one we install is the coating system.
How often does cool deck need recoating?
Plan on 10–12 years for a cool deck coating in Arizona sun, closer to 5–7 on decks with harsh full exposure. A color-and-seal refresh partway through keeps it looking new and protects the texture underneath.
Our Garden Lakes deck is from around 1990. Can the original texture stay?
Where the original Garden Lakes texture is still bonded, yes: after repair, a fresh lace texture goes right over it. Where it is hollow, it comes off first. Decks of that age are often a mix of both.
What do you check in the slab under a cool deck on low, flat Avondale ground?
Cracks, hollow spots and any offset that points to slab movement, all before we quote a coating. Older slabs around Old Town and Western Avenue have decades of settling, and Garden Lakes' late-1980s concrete is past thirty years.
Will a new cool deck color need review in Garden Lakes, Coldwater Springs or Alamar?
Yes in Garden Lakes, Coldwater Springs, Rancho Santa Fe and Alamar; Old Town streets often have no HOA, so your CC&Rs are the place to check. Where a cool deck color a neighbor can see needs sign-off, we leave samples for your submittal.
How does monsoon weather affect a cool deck job on flat Avondale lots?
We plan around it: a fresh coat needs dry weather to set, and we check drainage before coating. A new Alamar yard is the right moment to make sure water drains away from the house before a coating goes down.
When can you fit in a cool deck job in Rancho Santa Fe or elsewhere in Avondale?
Usually within a day or two for the estimate in Rancho Santa Fe; the visit time is set when you call or send the form. Most cool deck jobs are then 1–2 days of work, with the start date in your written quote.
How do we take care of a new cool deck?
Hose it off, keep pool chemicals and fertilizer from sitting on it, and don't drag furniture across the texture. A color-and-seal refresh every few years keeps it looking even.
Can you change our cool deck color completely?
Yes. When the whole deck gets new texture and color, you can pick any color in the palette instead of matching the old one. Lighter creams and sands stay coolest.
Do you remove the old cool deck around the coping?
Only where it has let go. The strip along the coping takes the most splash-out, so it fails first; loose material there is removed and repaired before the new texture goes on.
Cool Deck Resurfacing near Avondale
Other services in Avondale
Time to bring the cool deck back?
We measure your Avondale surface and put the price in writing, free and with no obligation.